Vodoravna povezava treh ali več IBC cistern – sistem 3+ PRO
3+ PRO (connect 3 or more IBC tanks horizontally) Price range: 66.99€ through 79.50€
Back to products
povezava dveh IBC cistern s fleksibilno armirano cevjo
DUO FLEXI (fleksibilna cev) - povezava dveh IBC cistern Price range: 29.99€ through 63.50€

DUO VERTIKAL – povezava dveh IBC cistern (postavitev ena nad drugo)

Price range: 44.50€ through 57.50€

Močna, zanesljiva in ugodna povezava dveh IBC cistern v postavitvi ena na vrhu druge – že sestavljena in pripravljena za montažo.

DUO VERTIKAL je sistem za povezavo dveh IBC cistern v vertikalni postavitvi (ena nad drugo). Namenjen je uporabnikom, ki želijo prihraniti prostor ter hkrati zagotoviti stabilno in zanesljivo pretakanje vode. Sistem je primeren za zbiranje deževnice, tehnično vodo in druge aplikacije, kjer je pomembna dolgotrajna uporaba brez puščanja.

Zakaj izbrati DUO VERTIKAL?

  • Izjemno močan in preizkušen sistem
  • Že v celoti sestavljen (vključno s teflonskim trakom)
  • Enostavna montaža – vi samo še vstavite cev (po potrebi jo skrajšate z olfa nožem)
  • 100 % EPDM tesnila – GRATIS, ekskluzivno pri nas
  • Odlično tesnjenje tudi pri starejših ali rahlo poškodovanih IBC ventilih
  • Primeren za uporabo na prostem (UV odporni materiali)

Cena vključuje

V ceno je vključeno celotno sestavljanje sistema (ovijanje s teflonom tam, kjer je potrebno).
Sistem prejmete pripravljen za montažo, brez dodatnega dela ali posebnega znanja.


Options:

Art.No.: #511, DUO VERT144,50€ (GardenFlow 3/4″ metal tap*).
Art.No.: #512, DUO VERT249,50€ (HighFlow 3/4″ metal tap*).
Art.No.: #513, DUO VERT350,50€ (double kovinska pipa 1/2″ PRO* z nastavkom za cev in s “klik” nastavkom).
Art.No.: #514, DUO VERT457,50€ (double kovinska pipa 3/4 PRO* z nastavkom za cev in s “klik” nastavkom).
Art.No.: #515, DUO VERT551,50€ (QuickFlow 1″ metal tap).
Art.No.: #516, DUO VERT652,50€ (plastični ventil MF PRO 1″ s plastičnim ravnim nastavkom za cev 25mm – pozicija na spodnjem kolenu*).
Art.No.: #517, DUO VERT752,50€ (kovinski ventil 1″ z medeninastim ravnim nastavkom za cev 25mm – pozicija na spodnjem kolenu).
Art.No.: #518, DUO VERT852,50€ (plastični ventil MF PRO 1″ s plastičnim nastavkom – knee za cev 25mm).

➡️ Sistem lahko sestavimo tudi po meri – dodatni izhodi, priklop hidroforja, več pip, dodaten priklop vrtne cevi itd.

*Pipes and valves can be seen in the pictures above and/or here.


Sealing and materials

Uporabljena so gumijasta EPDM tesnila (GRATIS) – ekskluzivno pri nas.
Posebej razvito tesnilo z optimalno trdoto učinkovito izravna tudi večje nepravilnosti na ventilu in zagotavlja dolgotrajno, zanesljivo tesnjenje brez puščanja, tudi pri starejših ali rahlo poškodovanih IBC ventilih.

Uporabljena LDPE (alkaten) cev je mehkejša, prilagodljiva in UV odporna ter omogoča enostavno montažo brez obremenjevanja ventilov.

Razlika med DUO sistemi

  • SIMPLE: tap or valve on the far left or right tank (you can decide during installation – adapt it to your needs – see the image in the gallery under SIMPLE).
  • KLASIK: pipa ali ventil med dvema cisternama (med katerima dvema se lahko odločite takrat, ko montirate – prilagodite vašim potrebam – glejte sliko v galeriji pri KLASIK).
  • FLEXI: povezava dveh cistern s fleksibilno armirano cevjo – (glejte sliko v galeriji pri FLEXI).
  • ZAPOREDNO: povezava dveh cistern s fleksibilno armirano cevjo v postavitvi ena za drugo, obe obrnjeni v isto smer – (glejte sliko v galeriji pri ZAPOREDNO).
  • VERTIKAL: povezava dveh cistern v postavitvi ena na vrhu druge – (glejte sliko v galeriji pri VERTIKAL).

Additional information

  • Ventil cisterne se lahko neovirano odpira in zapira, tudi pri sistemih z ventilom na spodnjem kolenu
  • Sistem je standardno dobavljiv v velikosti 1″ (32 mm), razen če je drugače označeno
  • Pri opcijah VERT1–VERT5 je višina iztoka pipe prilagojena pretakanju v zalivalko (cca 40 cm)
  • Po želji lahko izberete tudi opcijo PLUS: 1 × Opcija PLUS (priklop za vrtno cev z ventilom) – omogoča enostaven priklop vrtne cevi neposredno na sistem.

DUO VERTIKAL ustreza večini IBC cistern s standardnim ventilom S60×6. Montaža je zelo enostavna, sistem je že sestavljen in ne zahteva posebnega znanja. Vsi materiali so vzdržljivi, UV odporni in primerni za dolgotrajno zunanjo uporabo. Pri drugačnem navoju ventila sistem prilagodimo po meri.

First, select a system from the drop-down list above. Then you can choose from the upgrade options:
Povezava dveh IBC cistern ena nad drugo - DUO VERTIKAL
This item: DUO VERTIKAL - povezava dveh IBC cistern (postavitev ena nad drugo)
Price range: 44.50€ through 57.50€
Price range: 44.50€ through 57.50€
Rubber gaskets FREE (2 in set)
0.00
Option PLUS (connection for garden hose with valve)
15.50
Description

Upgrade options:

  • Duo PLUS (Garden hose connection with valve): this upgrade adds a valve with a garden hose connection to the existing connection. It is usually very practical to always have the garden hose connected and the main tap for quick overflow to the sprinkler.

The lower tank must be vented to allow water to flow smoothly through the valves.

The easiest and cheapest ways to do this are:


Use the HoseFlow Cover (pictured)- to which you connect the garden hose - on the lower tank. Fix the other end of the hose above the height where the water flows into the upper tank (e.g. where you have a spigot from the gutter - usually 200cm of hose is enough). This will allow the lower tank to fill smoothly via the valve.

Please note that this item can only be used if you have a tank on a metal pallet or if the tank does not have a centre leg.

HoseFlow Cover (new version!)

Če že imate pokrov z navojem na sredini, lahko uporabite:

Oddušnik AirVent

Please note that this item can only be used if you have a tank on a metal pallet or if the tank does not have a centre leg.

Če imate cisterno, ki ima sredinsko nogo in le-ta sedi na pokrovu spodnje cisterne, lahko zadevo rešite podobno z našimi brackets – priporočljivo 20 ali 25mm.

Except that in this case you will need to drill a suitable hole in the top of the lower tank - preferably somewhere near the lid.

Skoznik FlowTek Bend (15mm, 20mm, 25mm, 50mm)

Skozniki FlowTek Bend

Tip!
It is highly recommended that the water passes through a filter when it enters the tank to avoid rotting, mould and excessive growth of micro-organisms in the tank.
We offer rainwater filters for mounting on a hose with a gutter, which filter out larger impurities (leaves, moss, etc.).
We also have a variety of fine filters for mounting on the IBC tank itself.
Make sure the water in your tanks stays clean for as long as possible. With UV protective mat for IBC tank limit the growth of micro-organisms even more.

Video demonstration of how to assemble a DUO system:

In the package you usually get the tape already on the threads where it is needed or it is included.

Installation instructions for systems with alkaten connections:
Unscrew the nut (green in the video above) until 3/4 of the threads show. Insert the alkathene hose and push hard TO THE END (through the seal). Tighten. That's it.

The only possible problem you may encounter is during installation:
If you haven't inserted the hose deep enough and have already tightened it, you can no longer simply push the hose deeper.
In this case, unwind to the end. You will see a white ring* attached around the hose. Slide this ring up the pipe by hand.
Then repeat the above procedure.
*The white ring is cut into the tube when screwed in, thus ensuring 100% strength.

Please note that the alcathene connectors on the side where the alcathene hose connects are NOT wrapped with Teflon, as they have their own seal inside.

Instructions for wrapping threads with Teflon (PTFE) tape:
For all fine threads - for example between the reducer and the tap - Teflon tape should be used to ensure a tight seal and adequate leeway.
Example: always use the tap in a position where the spout is facing downwards. When screwed all the way into the reducer and Teflon is not used, the position of the tap is not necessarily ideal and can also be turned upwards. Teflon gives room to manoeuvre to keep the tap (or other item) in the position that suits us.

Hold the beginning of the tape and wind the tape in the direction of the threads (see picture).
Do not apply excessive force - neither when winding the strap nor when screwing it into the reducer.

How many wrappers is enough depends on the product. If there is too much Teflon, too much force must be applied when screwing into the reducer, which can lead to damage. Too little Teflon may mean that the case will not seal completely.

The recommended approximate number of wraps using our Teflon is between 6 and 10.
(Reducers and nipples need more of them than alkaline connectors.

wrap-with-teflon1_10

Additional details
Options

DUO VERTIKAL1

,

DUO VERTIKAL2

,

DUO VERTIKAL3

,

DUO VERTIKAL4

,

DUO VERTIKAL5

,

DUO VERTIKAL6

,

DUO VERTIKAL7

,

DUO VERTIKAL8