4X PRO

Video demonstration of how to assemble a 4x PRO system:

In the package you usually get the tape already on the threads where it is needed or it is included.

The lower tank must be vented to allow water to flow smoothly through the valves.

The easiest and cheapest ways to do this are:

Use the HoseFlow Cover (pictured)- to which you connect the garden hose - on the lower tank. Fix the other end of the hose above the height where the water flows into the upper tank (e.g. where you have a spigot from the gutter - usually 200cm of hose is enough). This will allow the lower tank to fill smoothly via the valve.

Please note that this item can only be used if you have a tank on a metal pallet or if the tank does not have a centre leg.

HoseFlow Cover (new version!)

Če že imate pokrov z navojem na sredini, lahko uporabite:

Oddušnik AirVent

Please note that this item can only be used if you have a tank on a metal pallet or if the tank does not have a centre leg.

Če imate cisterno, ki ima sredinsko nogo in le-ta sedi na pokrovu spodnje cisterne, lahko zadevo rešite podobno z našimi brackets – priporočljivo 20 ali 25mm.

Except that in this case you will need to drill a suitable hole in the top of the lower tank - preferably somewhere near the lid.

Skozniki FlowTek Bend

Tip!
It is highly recommended that the water passes through a filter when it enters the tank to avoid rotting, mould and excessive growth of micro-organisms in the tank.
We offer rainwater filters for mounting on a hose with a gutter, which filter out larger impurities (leaves, moss, etc.).
We also have a variety of fine filters for mounting on the IBC tank itself.
Make sure the water in your tanks stays clean for as long as possible. With UV protective mat for IBC tank limit the growth of micro-organisms even more.

Option PLUS!

You can also choose an option PLUS. This gives you an additional outlet for the garden hose - see picture.
This way, you can also completely empty the tank without interfering with the system.