Stick planter
Rod planter Oorspronkelijke prijs was: 29.50€.Huidige prijs is: 21.50€.
Back to products
4X PRO
4X PRO Price range: 103.50€ through 117.50€

4X SIMPLE

Price range: 88.50€ through 102.50€

System for connecting four IBC tanks.

Now with rubber seals FREE

Art.No.: #560b, 4XS188,50€ (GardenFlow 3/4″ metal tap*).
Art.No.: #560c, 4XS289,50€ (3/4" HighFlow metal tap*).
Art.No.: #560d, 4XS398,50€ (double 1/2″ PRO* metal tap).
Art.No.: #560e, 4XS4102,50€ (double metal tap 3/4 PRO*).
Art.No.: #560f, 4XS595,50€ (1″ metal tap*).
Art.No.: #560g, 4XS695,50€ (1″ QuickFlow metal tap*).
Art.No.: #560h, 4XS794,50€ (3/4″ metal valve + spigot*).
Art.No.: #560i, 4XS896,50€ (1″ metal valve + spigot*).
Art.No.: #560j, 4XS996,50€ (plastic MF PRO valve 1″ + adaptor*).


The package includes:
4x AVA reducer for tanks with valve fi 55-62mm, coarse thread S60x6 (DN50), T-piece 2x, T-piece F 1x, elbow F 4x, hose, tap, reducer.

*Alkaten tubes are slightly curved because they are stored on reels. We use LESS alkatene hoses, which are more flexible and much easier to use - you straighten them when installing and they stay in that position.

Foam gasket (PE). Excellent sealing and high durability!

*More information on taps and valves can be found at here.

4X SIMPLE
This item: 4X SIMPLE
Price range: 88.50€ through 102.50€
Price range: 88.50€ through 102.50€
Option PLUS (connection for garden hose with valve)
15.50
Rubber gaskets FREE (2 in set)
0.00
Description

Video demonstration of how to assemble a 4x PRO system - the video is a demonstration of the PRO system, but the assembly is very similar:

In the package you usually get the tape already on the threads where it is needed or it is included.

 

The lower tank must be vented to allow water to flow smoothly through the valves.

Picture

The easiest and cheapest ways to do this are:


Use the HoseFlow Cover (pictured)- to which you connect the garden hose - on the lower tank. Fix the other end of the hose above the height where the water flows into the upper tank (e.g. where you have a spigot from the gutter - usually 200cm of hose is enough). This will allow the lower tank to fill smoothly via the valve.

Please note that this item can only be used if you have a tank on a metal pallet or if the tank does not have a centre leg.

HoseFlow Cover (new version!)

Če že imate pokrov z navojem na sredini, lahko uporabite:

Oddušnik AirVent

Please note that this item can only be used if you have a tank on a metal pallet or if the tank does not have a centre leg.

Če imate cisterno, ki ima sredinsko nogo in le-ta sedi na pokrovu spodnje cisterne, lahko zadevo rešite podobno z našimi brackets – priporočljivo 20 ali 25mm.

Except that in this case you will need to drill a suitable hole in the top of the lower tank - preferably somewhere near the lid.

Skoznik FlowTek Bend (15mm, 20mm, 25mm, 50mm)

Skozniki FlowTek Bend

Tip!
It is highly recommended that the water passes through a filter when it enters the tank to avoid rotting, mould and excessive growth of micro-organisms in the tank.
We offer rainwater filters for mounting on a hose with a gutter, which filter out larger impurities (leaves, moss, etc.).
We also have a variety of fine filters for mounting on the IBC tank itself.
Make sure the water in your tanks stays clean for as long as possible. With UV protective mat for IBC tank limit the growth of micro-organisms even more.

PLUS option for IBC tank

 

 

 

 

 

 

Option PLUS!

You can also choose an option PLUS. This gives you an additional outlet for the garden hose - see picture.
This way, you can also completely empty the tank without interfering with the system.

Additional details
Options

4XS1

,

4XS2

,

4XS3

,

4XS4

,

4XS5

,

4XS6

,

4XS7

,

4XS8

,

4XS9